Description
Acrylate non-silicon antifoam.
Packaging
Material is packed in 5 gal per can with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS
It has good compatibility with other various additives and will not impact the air release of oil.
• Excellent anti-foaming property
• Good anti-foaming stability
• No effect on air release value
• Appearance – Light yellow liquid
• Kinematics Viscosity (100°C), mm2/s – Report
• Density (20℃)，kg/m3 – 880-920
Description
Scale inhibitors to prevent inorganic scale deposition which can cause flow assurance issues by plugging downhole and production equipment.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Scale inhibitor is another commonly used chemical inhydraulic fracturing. Scale inhibitor prevents iron and scale accumulation in the formation and wellbore. In addition, scale inhibitor enhances permeability by eliminating scale in the
formation and casing. Scale is a white material that forms inside the pipe (casing) and restricts the flow. The concentration of scale inhibitor is usually 0.1–0.25 gpt. Scale is formed by temperature changes, pressure drops, the mixing of different waters, and agitation.
• Suitable for continuous injection and squeeze applications
• Cost-effective, general-purpose scale inhibitor, particularly effective in controlling barium sulfate and calcium carbonate scales
• Exhibits strong anodic properties, functioning as a corrosion inhibitor in oxygenated systems such as cooling towers and drilling fluids
• Excellent tolerance to high calcium brines
• Optimized to provide superior performance over incumbent technologies
• Appearance: Amber liquid
• Density: 1.20 g/cm³ @ 20°C
• Pour point : 0°C to -10°C.
• pH, concentrated product: 5 – 7
• Solubility: Water
Description
A combination of Pour Point Depressant & paraffin dispersant for Crude Oil & residues.
Packaging
Material is packed in 5 gal per can with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS
Pour point depressants are used to allow the use of petroleum based mineral oils at lower temperatures. The lowest temperature at which a fuel or oil will pour is called a pour point. Wax crystals, which form at lower temperatures, may interfere with lubrication of mechanical equipment. High-quality pour point depressants can lower a pour point of an oil additive by as much as 40°C. Co-polymer and diester base product in Hydrocarbon solvent. It modifies the wax crystallization of crude oils and prevents & retards growth of interlinking crystals.
• Should be applied to oil above its cloud point continuously into the crude at a rate of 100 – 1000 ppm to achieve the required pour point specifications.
• Dosage up to 2000 ppm or more may be required to lower the pour point of the crude to the desirable level.
• The recommended treat rate should be determined by pour point testing on
• fresh crude oil. The dosages are very much dependent on the characteristics of the oil and of the production system.
• It is advisable to contact our Technical Representative for evaluation of the system prior to application of the PPD.
• Appearance: Pale Yellow Liquid
• Specific Gravity @ 20°C: 0.84 – 0.89 g/cc
• Solubility: Soluble in Oil & Insoluble in Water
Description
Powerful acid inhibitor for up to 100 deg C temperature & long duration acid contact applications.
Packaging
Material is packed in 55 gal per can with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Universal inhibitor for all concentration of Hydrochloric Acid, Sulphuric Acid, Hydrofluoric Acid, Sulphamic Acid for very severe and long duration metal contact in acidization of oil wells, cleaning of boiler, cooling tower and evaporating equipment.
• Prevent corrosion/pitting problems of the surface at high temperature and pressure.
• Can be used on brass alloy, nickel, copper, SS, MS steel etc.
• Increases metal life thereby increase profitability of the company.
• Decreases frequent shutdowns, periodical cleaning of the surface.
• Appearance Dark amber colour liquid
• Solubility in water : Soluble.
• pH of 5% soln. 5 . 0 – 8.0
• Specific gravity @ 30 deg C 1.00 +/- 0.02
Description
Powerful acid inhibitor for high temperature up to 110 deg C & long duration of more than 6 hrs. acid contact applications.
Packaging
Material is packed in 55 gal per can with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
• Removal of lime deposits or water scale from powder plant boilers, piping systems and evaporating equipment.
• Removal of scale and deposits from equipment in refineries and other industries
• Prevent corrosion/pitting problems of the surface at high temperature and pressure.
• Can be used on brass alloy, nickel, copper, SS, MS steel etc.
• Increases metal life thereby increase profitability of the company.
• Decreases frequent shutdowns, periodical cleaning of the surface.
• Appearance Amber colour liquid
• Solubility in water : Dispersible.
• pH of 5% soln. 6 . 5 – 8.0
• Amine value 55 – 75
• Freezing point deg C – closed cup < 5 0
Description
Powerful acid inhibitor for high temperature up to 110 deg. c & long duration of more than 6 hrs. acid contact applications.
Packaging
Material is packed in 55 gal per can with proper hazard identification details labelled
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS
• Removal of lime deposits or water scale from powder plant boilers, piping systems and evaporating equipment.
• Removal of scale and deposits from equipment in refineries and other industries
• Prevent corrosion/pitting problems of the surface at high temperature and pressure.
• Can be used on brass alloy, nickel, copper, SS, MS steel etc.
• Increases metal life thereby increase profitability of the company.
• Decreases frequent shutdowns, periodical cleaning of the surface.
• Appearance Yellow to Brown colour clear liquid
• Specific Gravity @ 20°C : 1.00 – 1.02.
• pH of 1% soln. 4 . 0 – 6.0
• Moisture Content 1.0 % max.
Description
Powerful acid inhibitor to reduce corrosion on steel which minimize direct attack on the metal during oil field acidization, scale removing, metal cleaning for galvanizing, picking, tinning, electroplating, boiler, cooling tower pipeline, transformer, heat exchanger, power plants and other cleaning operations.
Packaging
Material is packed in 55 gal per can with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS
• Removal of lime deposits or water scale from powder plant boilers, piping systems and evaporating equipment.
• Removal of scale and deposits from equipment in refineries and other industries
• Prevent corrosion/pitting problems of the surface at high temperature and pressure.
• Can be used on brass alloy, nickel, copper, SS, MS steel etc.
• Increases metal life thereby increase profitability of the company.
• Decreases frequent shutdowns, periodical cleaning of the surface.
• Appearance Amber colour liquid
• Solubility in water : Dispersible.
• pH of 5% soln. 1 0 – 12
• Amine value 210 – 240
• Pour point : 0°C to -10°C.
Description
Downhole remediation product to dissolve paraffin. Paraffin / wax dissolver (non-ionic surfactant).
Packaging
Material is packed in 25 kg per sack with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
• Substantial improvement in asphaltene solubility is observed in case of solvent with a suitable dose of Dispersant. Core flow studies using a mixture of Xylene, Toluene, Naphthalene and suitable dose of Unitop-DISPERSOL-6102, show significant improvement in the rock permeability and appreciable pressure drop in the fluid flow.
• UNITOP-DISPERSOL-6102, impregnated solvent wash of asphaltene damaged core facilitates easy removal of absorbed asphaltenes from the rock surface.
• The efficiency of Unitop-DISPERSOL-6102 is evaluated based on its ability to disperse and keep the asphaltene in suspended form. Crude oil samples were distilled off, up to a temperature of 280 deg C and the residue is used for evaluating the efficiency
• Effectively penetrates and dissolves waxy deposits resulting in significantly less production downtime.
• Works at ambient temperatures and is noncorrosive for simplified treatment designs. Designed for easier and safer field application versus to traditional hot oil treatments.
• Low treatment cost – low price/gallon and cold treatment saves energy expense used in hot oiling. The efficient cleaning lowers the chance of wax deposits blocking production, decreases overall production downtime of wells as compared to hot oiling regimens, and it has a proven ability to extend equipment lifetime.
• Appearance: white, odorless, tasteless, waxy solid.
• Melting point: 46 – 68°C
• Density: 900 kg/m3.
• Solubility: Insoluble in water, but soluble in ether, benzene, and certain esters.
Description
Emulsion breaker – EO/PO Block copolymer.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS
Specialty chemical that separates two liquids that are emulsified. This chemical is most used in the processing of crude oil, which is commonly produced with significant amounts of saline water. Demulsifier are surface active agents that are designed to migrate at the oil-water interface and neutralize the effect of emulsifying agents. The selection of the right demulsifier is crucial in the emulsion-breaking process. Because of the large variety of components present in crude oil, it is important to select the demulsifier based on the crude oil type.
• Low cost highly efficient Demulsifier widely used for dehydrating and desalting of crude petroleum.
• Use of this Demulsifier along with electric deposition is the most widely followed methods because of ease of operation, quicker separation of oil and water phase, lesser initial investment and low production cost.
• Xylene-Soluble
• Water- dispersible
• Appearance: Clear liquid
• Specific Gravity @ 25°C: 0.90 – 0.98
• pH Range: 5.0 – 8.0
Description
Emulsion breaker – EO/PO Block copolymer.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Specialty chemical that separates two liquids that are emulsified. This chemical is most used in the processing of crude oil, which is commonly produced with significant amounts of saline water. Demulsifier are surface active agents that are designed to migrate at the oil-water interface and neutralize the effect of emulsifying agents. The selection of the right demulsifier is crucial in the emulsion-breaking process. Because of the large variety of components present in crude oil, it is important to select the demulsifier based on the crude oil type.
• Low cost highly efficient Demulsifier widely used for dehydrating and desalting of crude petroleum.
• Use of this Demulsifier along with electric deposition is the most widely followed methods because of ease of operation, quicker separation of oil and water phase, lesser initial investment and low production cost.
• Xylene-Soluble
• Water- dispersible
• Appearance: Clear liquid
• Specific Gravity @ 25°C: 0.90 – 0.98
• pH Range: 5.0 – 8.0
Description
Emulsion breaker – EO/PO Block copolymer.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Specialty chemical that separates two liquids that are emulsified. This chemical is most used in the processing of crude oil, which is commonly produced with significant amounts of saline water. Demulsifier are surface active agents that are designed to migrate at the oil-water interface and neutralize the effect of emulsifying agents. The selection of the right demulsifier is crucial in the emulsion-breaking process. Because of the large variety of components present in crude oil, it is important to select the demulsifier based on the crude oil type.
• Low cost highly efficient Demulsifier widely used for dehydrating and desalting of crude petroleum.
• Use of this Demulsifier along with electric deposition is the most widely followed methods because of ease of operation, quicker separation of oil and water phase, lesser initial investment and low production cost.
• Xylene-Soluble
• Water- dispersible
• Appearance: Yellow Viscous Liquid
• Specific Gravity @ 25°C: 0.90 – 0.98.
• pH Range: 5.0 – 8.0
Description
Emulsion breaker – EO/PO Block copolymer.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Specialty chemical that separates two liquids that are emulsified. This chemical is most used in the processing of crude oil, which is commonly produced with significant amounts of saline water. Demulsifier are surface active agents that are designed to migrate at the oil-water interface and neutralize the effect of emulsifying agents. The selection of the right demulsifier is crucial in the emulsion-breaking process. Because of the large variety of components present in crude oil, it is important to select the demulsifier based on the crude oil type.
• Low cost highly efficient Demulsifier widely used for dehydrating and desalting of crude petroleum.
• Use of this Demulsifier along with electric deposition is the most widely followed methods because of ease of operation, quicker separation of oil and water phase, lesser initial investment and low production cost.
• Xylene-Soluble
• Water- dispersible
• Appearance: Colorless to pale yellow liquid to paste
• Specific Gravity @ 25°C: 0.90 – 0.98.
• pH Range: 5.0 – 8.0
Description
Emulsion breaker – Resin Alkoxylate
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS
Specialty chemical that separates two liquids that are emulsified. This chemical is most used in the processing of crude oil, which is commonly produced with significant amounts of saline water. Demulsifier are surface active agents that are designed to migrate at the oil-water interface and neutralize the effect of emulsifying agents. The selection of the right demulsifier is crucial in the emulsion-breaking process. Because of the large variety of components present in crude oil, it is important to select the demulsifier based on the crude oil type.
• Low cost highly efficient Demulsifier widely used for dehydrating and desalting of crude petroleum.
• Use of this Demulsifier along with electric deposition is the most widely followed methods because of ease of operation, quicker separation of oil and water phase, lesser initial investment and low production cost.
• Xylene-Soluble
• Water- dispersible
• Appearance: Dark brown viscous liquid
• Specific Gravity @ 25°C: 0.90 – 0.98
• pH Range: 5.0 – 8.0
Description
Emulsion breaker – Resin Alkoxylate.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Specialty chemical that separates two liquids that are emulsified. This chemical is most used in the processing of crude oil, which is commonly produced with significant amounts of saline water. Demulsifier are surface active agents that are designed to migrate at the oil-water interface and neutralize the effect of emulsifying agents. The selection of the right demulsifier is crucial in the emulsion-breaking process. Because of the large variety of components present in crude oil, it is important to select the demulsifier based on the crude oil type.
• Low cost highly efficient Demulsifier widely used for dehydrating and desalting of crude petroleum.
• Use of this Demulsifier along with electric deposition is the most widely followed methods because of ease of operation, quicker separation of oil and water phase, lesser initial investment and low production cost.
• Xylene-Soluble
• Water- dispersible
• Appearance: Dark brown viscous liquid
• Specific Gravity @ 25°C: 0.90 – 0.98.
• pH Range: 5.0 – 8.0
Description
Emulsion breaker – Resin Alkoxylate.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Specialty chemical that separates two liquids that are emulsified. This chemical is most used in the processing of crude oil, which is commonly produced with significant amounts of saline water. Demulsifier are surface active agents that are designed to migrate at the oil-water interface and neutralize the effect of emulsifying agents. The selection of the right demulsifier is crucial in the emulsion-breaking process. Because of the large variety of components present in crude oil, it is important to select the demulsifier based on the crude oil type.
• Low cost highly efficient Demulsifier widely used for dehydrating and desalting of crude petroleum.
• Use of this Demulsifier along with electric deposition is the most widely followed methods because of ease of operation, quicker separation of oil and water phase, lesser initial investment and low production cost.
• Xylene-Soluble
• Water- dispersible
• Appearance: Dark brown viscous liquid
• Specific Gravity @ 25°C: 0.90 – 0.98.
• pH Range: 5.0 – 8.0
Description
Emulsion breaker – Resin Alkoxylate.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Specialty chemical that separates two liquids that are emulsified. This chemical is most used in the processing of crude oil, which is commonly produced with significant amounts of saline water. Demulsifier are surface active agents that are designed to migrate at the oil-water interface and neutralize the effect of emulsifying agents. The selection of the right demulsifier is crucial in the emulsion-breaking process. Because of the large variety of components present in crude oil, it is important to select the demulsifier based on the crude oil type.
• Low cost highly efficient Demulsifier widely used for dehydrating and desalting of crude petroleum.
• Use of this Demulsifier along with electric deposition is the most widely followed methods because of ease of operation, quicker separation of oil and water phase, lesser initial investment and low production cost.
• Xylene-Soluble
• Water- dispersible
• Appearance: Dark brown viscous liquid
• Specific Gravity @ 25°C: 0.90 – 0.98.
• pH Range: 5.0 – 8.0
Description
Emulsion breaker – Resin Ethoxylate.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Specialty chemical that separates two liquids that are emulsified. This chemical is most used in the processing of crude oil, which is commonly produced with significant amounts of saline water. Demulsifier are surface active agents that are designed to migrate at the oil-water interface and neutralize the effect of emulsifying agents. The selection of the right demulsifier is crucial in the emulsion-breaking process. Because of the large variety of components present in crude oil, it is important to select the demulsifier based on the crude oil type.
• Low cost highly efficient Demulsifier widely used for dehydrating and desalting of crude petroleum.
• Use of this Demulsifier along with electric deposition is the most widely followed methods because of ease of operation, quicker separation of oil and water phase, lesser initial investment and low production cost.
• Xylene-Soluble
• Water- dispersible
• Appearance: Dark brown viscous liquid
• Specific Gravity @ 25°C: 0.90 – 0.98.
• pH Range: 5.0 – 8.0
Description
Emulsion breaker – Resin Ethoxylate.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Specialty chemical that separates two liquids that are emulsified. This chemical is most used in the processing of crude oil, which is commonly produced with significant amounts of saline water. Demulsifier are surface active agents that are designed to migrate at the oil-water interface and neutralize the effect of emulsifying agents. The selection of the right demulsifier is crucial in the emulsion-breaking process. Because of the large variety of components present in crude oil, it is important to select the demulsifier based on the crude oil type.
• Low cost highly efficient Demulsifier widely used for dehydrating and desalting of crude petroleum.
• Use of this Demulsifier along with electric deposition is the most widely followed methods because of ease of operation, quicker separation of oil and water phase, lesser initial investment and low production cost.
• Xylene-Soluble
• Water- dispersible
• Appearance: Dark brown viscous liquid
•Specific Gravity @ 25°C: 0.90 – 0.98.
• pH Range: 5.0 – 8.0
Description
Emulsion breaker – Resin Ethoxylate.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Specialty chemical that separates two liquids that are emulsified. This chemical is most used in the processing of crude oil, which is commonly produced with significant amounts of saline water. Demulsifier are surface active agents that are designed to migrate at the oil-water interface and neutralize the effect of emulsifying agents. The selection of the right demulsifier is crucial in the emulsion-breaking process. Because of the large variety of components present in crude oil, it is important to select the demulsifier based on the crude oil type.
• Low cost highly efficient Demulsifier widely used for dehydrating and desalting of crude petroleum.
• Use of this Demulsifier along with electric deposition is the most widely followed methods because of ease of operation, quicker separation of oil and water phase, lesser initial investment and low production cost.
• Xylene-Soluble
• Water- dispersible
• Appearance: Dark brown viscous liquid
• Specific Gravity @ 25°C: 0.90 – 0.98.
• pH Range: 5.0 – 8.0
Description
Emulsion breaker – Blend of Resin Alkoxylate and alkyl amine propoxylate.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Specialty chemical that separates two liquids that are emulsified. This chemical is most used in the processing of crude oil, which is commonly produced with significant amounts of saline water. Demulsifier are surface active agents that are designed to migrate at the oil-water interface and neutralize the effect of emulsifying agents. The selection of the right demulsifier is crucial in the emulsion-breaking process. Because of the large variety of components present in crude oil, it is important to select the demulsifier based on the crude oil type.
• Low cost highly efficient Demulsifier widely used for dehydrating and desalting of crude petroleum.
• Use of this Demulsifier along with electric deposition is the most widely followed methods because of ease of operation, quicker separation of oil and water phase, lesser initial investment and low production cost.
• Xylene-Soluble
• Water- dispersible
• Appearance: Dark brown viscous liquid
• Specific Gravity @ 25°C: 0.90 – 0.98.
• pH Range: 5.0 – 8.0
Description
Emulsion breaker – Blend of Resin Alkoxylate and alkyl amine propoxylate.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Specialty chemical that separates two liquids that are emulsified. This chemical is most used in the processing of crude oil, which is commonly produced with significant amounts of saline water. Demulsifier are surface active agents that are designed to migrate at the oil-water interface and neutralize the effect of emulsifying agents. The selection of the right demulsifier is crucial in the emulsion-breaking process. Because of the large variety of components present in crude oil, it is important to select the demulsifier based on the crude oil type.
• Low cost highly efficient Demulsifier widely used for dehydrating and desalting of crude petroleum.
• Use of this Demulsifier along with electric deposition is the most widely followed methods because of ease of operation, quicker separation of oil and water phase, lesser initial investment and low production cost.
• Xylene-Soluble
• Water- dispersible
• Appearance: Dark brown viscous liquid
• Specific Gravity @ 25°C: 0.90 – 0.98.
• pH Range: 5.0 – 8.0
Description
Emulsion breaker – Blend of proxylate and alkyl amine proxylate.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Specialty chemical that separates two liquids that are emulsified. This chemical is most used in the processing of crude oil, which is commonly produced with significant amounts of saline water. Demulsifier are surface active agents that are designed to migrate at the oil-water interface and neutralize the effect of emulsifying agents. The selection of the right demulsifier is crucial in the emulsion-breaking process. Because of the large variety of components present in crude oil, it is important to select the demulsifier based on the crude oil type.
• Low cost highly efficient Demulsifier widely used for dehydrating and desalting of crude petroleum.
• Use of this Demulsifier along with electric deposition is the most widely followed methods because of ease of operation, quicker separation of oil and water phase, lesser initial investment and low production cost.
• Xylene-Soluble
• Water- dispersible
• Appearance: Yellow viscous liquid
• Specific Gravity @ 25°C: 0.90 – 0.98.
• pH Range: 5.0 – 8.0
Description
Emulsion breaker – Amine Alkoxylate.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Specialty chemical that separates two liquids that are emulsified. This chemical is most used in the processing of crude oil, which is commonly produced with significant amounts of saline water. Demulsifier are surface active agents that are designed to migrate at the oil-water interface and neutralize the effect of emulsifying agents. The selection of the right demulsifier is crucial in the emulsion-breaking process. Because of the large variety of components present in crude oil, it is important to select the demulsifier based on the crude oil type.
• Low cost highly efficient Demulsifier widely used for dehydrating and desalting of crude petroleum.
• Use of this Demulsifier along with electric deposition is the most widely followed methods because of ease of operation, quicker separation of oil and water phase, lesser initial investment and low production cost.
• Xylene-Soluble
• Water- dispersible
• Appearance: Pale yellow liquid
• Specific Gravity @ 25°C: 0.90 – 0.98.
• pH Range: 5.0 – 8.0
Description
Emulsion breaker – Alkyl amine propoxylate.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Specialty chemical that separates two liquids that are emulsified. This chemical is most used in the processing of crude oil, which is commonly produced with significant amounts of saline water. Demulsifier are surface active agents that are designed to migrate at the oil-water interface and neutralize the effect of emulsifying agents. The selection of the right demulsifier is crucial in the emulsion-breaking process. Because of the large variety of components present in crude oil, it is important to select the demulsifier based on the crude oil type.
• Low cost highly efficient Demulsifier widely used for dehydrating and desalting of crude petroleum.
• Use of this Demulsifier along with electric deposition is the most widely followed methods because of ease of operation, quicker separation of oil and water phase, lesser initial investment and low production cost.
• Xylene-Soluble
• Water- dispersible
• Appearance: Yellow Viscous liquid
• Specific Gravity @ 25°C: 0.90 – 0.98.
• pH Range: 5.0 – 8.0
Description
Variety of liquid for reverse emulsion breaking process.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Designed for application primarily in frac flowback water recycling facilities due to its compatibility with frac fluids. Used with a corrosion resistant, positive displacement pump. The application point should be selected to ensure efficient
mixing upstream of the settling tanks, ponds or free water knockout.
• Designed to allow complete oil separation where flowback water containing oil carryover must be removed to meet effluent or reuse quality standards.
• Physical State: Liquid
• Density: 8.59 lb./gal
• Color: Light Amber
• Freeze Point: 32°F (0°C) Viscosity: 5-35 cps @ 77°F (25°C)
• Solubility: Crude Oil Insoluble / High TDS Brine Soluble / Fresh Water Soluble
Description
Drag reduction agents (DRA) are pipeline flow improvers used primarily in the oil and gas industry.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Designed to reduce friction in asphaltene crude oils being moved through pipelines under turbulent flow conditions. This oil-in-water stabilized emulsion product minimizes potential impact on refinery operations.
• Effective DRA
Increase throughput
Reduces pipeline friction
Decreases pumping energy requirements
• Low impact to refining operations
Safe in desalters
No impact to fuels
• Easy to apply
Product is stable in standard conditions for long periods of time
Pumpable above 32°F
• Specific gravity at 60°F (16°C) 1.0
• Typical density at 60°F (16°C): 8.3 lb/US gal (0.995 kg/m3)
• Pour point 32°F (0°C)
• pH 7.3
• Viscosity at 60°F (16°C): 298.5 cP at 20 RPM
Description
Specialty product for removal of schmoo from well bore and production line.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and following the precautions as mentioned in the MSDS.
Designed and used globally, to thoroughly remove synthetic or oil-based residues from the wellbore, leaving tubulars in a clean and water wet state. It is compatible with all commonly used brines and highly effective in low or high temperature wells
• Dissolves and removes schmoo
• Appearance: Clear Liquid
• Color: Pale Yellow
• pH: (2% in 80:20 IPA/Water) 8-10
• Dynamic Viscosity: < 10 cP
Description
VISCOELASTIC SURFACTANT Well stimulation additive-enhance oil recovery.
Packaging
Material is packed in 55/5 gal per drum with proper hazard identification details labelled.
Safety and Handling
Material must be handled as an Industrial chemical, wearing protective equipment and followin the precautions as mentioned in the MSDS.
Viscoelastic surfactants (VES) are an ideal replacement for polymeric viscosifiers in oilfield processes. The properties of VES tend to remain more constant when exposed to different environments, such as variations in temperature and fluid salinity. VES are also soluble in wellbore fluids, leaving no residue behind resulting in no damage to the formation
• Non-damaging viscosifiers in gravel packing and completion fluid applications.
• High temperature lubricants in non-damaging drill-in fluids.
• Non-damaging viscous pad in leak off and fluid loss prevention.
• Appearance : Transparent liquid
• Specific Gravity: 0.99
• Color : Pale yellow to yellow
• Solubility : Fresh and salt water
• Pour Point : -10/-23° F/C